Backing up with BOSH Backup and Restore

Page last updated:

This topic describes how to use BOSH Backup and Restore (BBR) to back up a BOSH deployment or BOSH Director. Follow the steps below to back up a BOSH Director, a BOSH deployment, or both.

To perform a restore, see Restoring with BOSH Backup and Restore.

Prerequisites

Before using the result of the backup to restore to a destination environment, verify that the current environment and the destination environment are compatible. For information, see Compatibility of restore.

Connect to your jumpbox

To back up a BOSH Director or BOSH deployment using BBR, you need to establish a connection to your jumpbox in one of the ways below:

For more information about the jumpbox, see Installing BOSH Backup and Restore.

Option 1: Connect with SSH

To connect to your jumpbox using the command line interface (CLI), run:

ssh -i PATH-TO-KEY JUMPBOX-USERNAME@JUMPBOX-ADDRESS

Where:

  • PATH-TO-KEY is the local path to your private key file for the jumpbox host.
  • JUMPBOX-USERNAME is your jumpbox username.
  • JUMPBOX-ADDRESS is the IP address or hostname of the jumpbox.

Note If you connect to your jumpbox with SSH, you must run the BBR commands in this topic from inside your jumpbox.

Option 2: Connect with BOSH_ALL_PROXY

You can use the environment variable BOSH_ALL_PROXY to open an SSH tunnel with SOCKS5 to the jumpbox. This tunnel enables you to forward requests from your local machine to the BOSH Director through the jumpbox. When BOSH_ALL_PROXY is set, the BBR CLI uses its value to forward requests to the BOSH Director.

Note For the following procedures to work, ensure the SOCKS port is not already in use by a different tunnel or process.

To connect with BOSH_ALL_PROXY, follow one of the below procedures:

  • To establish the tunnel separate from the BOSH CLI:

    1. Establish the tunnel and make it available on a local port by running:
      ssh -4 -D SOCKS-PORT -fNC JUMPBOX-USERNAME@JUMPBOX-ADDRESS -i JUMPBOX-KEY-FILE -o ServerAliveInterval=60 Where:
      • SOCKS-PORT is the local SOCKS port.
      • JUMPBOX-USERNAME is your jumpbox username.
      • JUMPBOX-ADDRESS is the IP address or hostname of the jumpbox.
      • JUMPBOX-KEY-FILE is the local SSH private key for accessing the jumpbox.
    2. Provide the BOSH CLI with access to the tunnel using the BOSH_ALL_PROXY environment variable by running:
      export BOSH_ALL_PROXY=socks5://localhost:SOCKS-PORT
      Where SOCKS-PORT is your local SOCKS port.
  • To establish the tunnel using the BOSH CLI:

    Provide the BOSH CLI with the necessary SSH credentials to create the tunnel by running:

    export BOSH_ALL_PROXY=ssh+socks5://JUMPBOX-USERNAME@JUMPBOX-ADDRESS:SOCKS-PORT?private-key=JUMPBOX-KEY-FILE
    

    Where:

    • JUMPBOX-USERNAME is your jumpbox username.
    • JUMPBOX-ADDRESS is the IP address or hostname of the jumpbox.
    • SOCKS-PORT is the local SOCKS port.
    • JUMPBOX-KEY-FILE is the local SSH private key for accessing the jumpbox.

Note Using BOSH_ALL_PROXY can result in longer backup and restore times due to network performance degradation. All operations must pass through the proxy, which can make moving backup artifacts significantly slower.

Caution In the BBR v1.5.0 and earlier, the tunnel created by the BOSH CLI does not include the ServerAliveInterval flag. This might cause your SSH connection to timeout when transferring large artifacts. In BBR v1.5.1, the ServerAliveInterval flag is included. For more information, see bosh-backup-and-restore on GitHub.

Back up a BOSH Director

  1. Run the BBR pre-backup check to confirm that your BOSH Director is reachable, and can therefore be backed up with BBR.

    bbr director \
    --private-key-path PATH-TO-PRIVATE-KEY \
    --username USER-NAME \
    --host BOSH-DIRECTOR-IP \
    pre-backup-check
    

    Where:

    • PATH-TO-PRIVATE-KEY is the path to the SSH private key used to connect to the BOSH Director.
    • USER-NAME is the SSH username of the BOSH Director.
    • BOSH-DIRECTOR-IP is the internal (or public) IP address of your BOSH Director. If the BOSH Director is public, this could be a public IP address or a domain, such as my-bosh.xxx.cf-app.com.

    For example:

    $ bbr director \
    --private-key-path bosh.pem \
    --username bosh \
    --host bosh.example.com \
    pre-backup-check
    

Note The pre-backup check cannot check for available disk space, ongoing network connections (for example, to databases), correctly configured credentials, or other circumstances that might impede a successful backup. It only checks that we can connect to the director.

  1. If the pre-check command fails:

    • Run the command again adding the --debug flag to enable debug logs. For more information, see BBR logging.
    • Make the fix suggested in the output and run the pre-backup check again.
      For example, the command fails if the BOSH Director selected did not have the correct backup scripts or if the connection to the BOSH Director failed.
  2. If you are using BOSH v270.0 or later, you can prune the BOSH blobstore by running:

    bosh clean-up --all
    

    This command removes all unused resources, including packages complied against older stemcells. If a lot of unused resources have accumulated over time, this clean-up causes a smaller, faster backup of BOSH Director. For more information, see Clean-up in the BOSH documentation.

    Caution This command is destructive and can remove resources that are unused but necessary. For example, if an on-demand service broker is deployed and no service instances have been created, the releases needed to create a service instance are categorized as unused and are removed.

  3. Run the BBR backup command to back up your BOSH Director:

    bbr director \
    --private-key-path PATH-TO-PRIVATE-KEY \
    --username USER-NAME \
    --host BOSH-DIRECTOR-IP \
    backup
    

    Where:

    • PATH-TO-PRIVATE-KEY is the path to the SSH private key used to connect to the BOSH Director.
    • USER-NAME is the SSH username of the BOSH Director.
    • BOSH-DIRECTOR-IP is the internal (or public) IP address of your BOSH Director. If the BOSH Director is public, this could be a public IP address or a domain, such as my-bosh.xxx.cf-app.com.

    For example:

    $ bbr director \
    --private-key-path bosh.pem \
    --username bosh \
    --host bosh.example.com \
    backup
    
  4. If the backup command completes successfully, follow the steps in Manage your backup artifact below.

  5. If the backup command fails:

Back up a BOSH deployment

  1. Run the BBR pre-backup check to confirm that your BOSH Director is reachable and has a deployment that you can back up with BBR:

    BOSH_CLIENT_SECRET=BOSH-CLIENT-SECRET \
    bbr deployment \
    --target BOSH-TARGET \
    --username BOSH-CLIENT \
    --deployment BOSH-DEPLOYMENT \
    --ca-cert PATH-TO-BOSH-SERVER-CERTIFICATE \
    pre-backup-check
    

    Replace the placeholder text as follows:

    • BOSH-CLIENT-SECRET: If you have a BOSH Director with User Account and Authentication (UAA) as the authentication provider, this is a UAA client secret as the password. If you have a BOSH Director with basic authentication configured, this is your password.
    • BOSH-TARGET: The FQDN or IP address of your BOSH Director.
    • BOSH-CLIENT: If you have a BOSH Director with User Account and Authentication (UAA) as the authentication provider, this is a UAA client as the username. If you have a BOSH Director with basic authentication configured, this is your username.
    • BOSH-DEPLOYMENT: The name of the deployment you want to back up. For a list of deployments, run bosh deployments.
    • PATH-TO-BOSH-CA-CERTIFICATE: The path to the BOSH Director’s Certificate Authority (CA) certificate, if the certificate is not verifiable by the local machine’s certificate chain. If you manually deployed, then the certificate might be stored in a secrets.yml or similar file.

    For example:

    $ BOSH_CLIENT_SECRET=p455w0rd \
    bbr deployment \
    --target bosh.example.com \
    --username jumpbox \
    --deployment cf-acceptance-0 \
    --ca-cert bosh.ca.cert \
    pre-backup-check
    

Note The pre-backup check cannot check for available disk space, ongoing network connections (for example, to databases), correctly configured credentials, or other circumstances that might impede a successful backup. It only checks that we can connect to the director, and the VMs of our deployment.

  1. If the pre-backup check command fails:

    • Run the command again adding the --debug flag to enable debug logs.
      For more information, see BBR logging.
    • Make the fix suggested in the output and run the pre-backup check again.
      For example, the deployment you selected might not have the correct backup scripts, or the connection to the BOSH Director failed.
  2. If the pre-backup check succeeds, run the BBR backup command to back up your BOSH deployment:

    BOSH_CLIENT_SECRET=BOSH-CLIENT-SECRET \
    nohup bbr deployment \
    --target BOSH-TARGET \
    --username BOSH-CLIENT \
    --deployment BOSH-DEPLOYMENT \
    --ca-cert PATH-TO-BOSH-SERVER-CERTIFICATE \
    backup
    

    Replace the placeholder text as follows. These are the same values as used in the with the previous command.

    • BOSH-CLIENT-SECRET: If you have a BOSH Director with User Account and Authentication (UAA) as the authentication provider, this is a UAA client secret as the password. If you have a BOSH Director with basic authentication configured, this is your password.
    • BOSH-TARGET: The FQDN or IP address of your BOSH Director.
    • BOSH-CLIENT: If you have a BOSH Director with User Account and Authentication (UAA) as the authentication provider, this is a UAA client as the username. If you have a BOSH Director with basic authentication configured, this is your username.
    • BOSH-DEPLOYMENT: The name of the deployment you want to back up. For a list of deployments, run bosh deployments.
    • PATH-TO-BOSH-CA-CERTIFICATE: The path to the BOSH Director’s Certificate Authority (CA) certificate, if the certificate is not verifiable by the local machine’s certificate chain. If you manually deployed, then the certificate might be stored in a secrets.yml or similar file.

    Note To include the manifest in the backup artifact, add the --with-manifest flag. However, be aware that doing so causes the backup artifact to include credentials that you need to keep secret.

    Caution The --unsafe-lock-free flag should only be used by advanced users because it can result in inconsistent backups. For more information about this feature, see Experimental features.

    For example:

    $ BOSH_CLIENT_SECRET=p455w0rd \
    nohup bbr deployment \
    --target bosh.example.com \
    --username jumpbox \
    --deployment cf-acceptance-0 \
    --ca-cert bosh.ca.cert \
    backup

    Note The BBR backup command can take a long time to complete. You can run it independently of the SSH session so that the process can continue running even if your connection to the jumpbox fails. The command above uses nohup, but you can run the command in a screen or tmux session instead.

  3. If the command completes successfully, follow the steps in What to do with your backup artifact below.

  4. If the backup command fails:

Recover from a failing command

If the backup fails for the BOSH Director or deployment:

  1. Ensure that you set all the parameters in the command.
  2. Ensure the BOSH Director credentials are valid.
  3. If you are backing up a deployment, ensure the deployment you specify in the BBR command exists.
  4. Ensure that the jumpbox can reach the BOSH Director.
  5. See BBR logging.
  6. If you see the error message Directory /var/vcap/store/bbr-backup already exists on instance, run the appropriate cleanup command. See Clean up after a failed backup below.
  7. If the backup artifact is corrupted, discard the failing artifacts and rerun the backup.

Cancel a backup

Backups can take a long time. You might want to cancel a backup, for example, if you learn that the backup is going to fail or that your developers urgently need to push an app.

To cancel a backup:

  1. Terminate the BBR process by pressing Ctrl-C and typing yes to confirm.

Caution Cancelling a backup can leave the system in an unusable state and prevent additional backups. Follow the steps in Clean up after a failed backup below to fix these issues.

Clean up after a failed backup

If your backup process fails, it might leave the BBR backup directory on the instance, causing any subsequent attempts to backup to fail. In addition, BBR might not have run the post-backup scripts, leaving the instance in a locked state.

Follow the steps below to use the BBR cleanup script after a failed backup attempt.

  1. If the BOSH Director backup failed, run:

    bbr director \
    --private-key-path PATH-TO-PRIVATE-KEY \
    --username USER-NAME \
    --host BOSH-DIRECTOR-IP \
    backup-cleanup
    

    For example:

    $ bbr director \
    --private-key-path bosh.pem \
    --username bosh \
    --host bosh.example.com \
    backup-cleanup
    
  2. If the BOSH deployment backup failed, run:

    BOSH_CLIENT_SECRET=BOSH-CLIENT-SECRET \
    bbr deployment \
    --target BOSH-TARGET \
    --username BOSH-CLIENT \
    --deployment BOSH-DEPLOYMENT \
    --ca-cert PATH-TO-BOSH-CA-CERTIFICATE \
    backup-cleanup
    

    For example:

    $ BOSH_CLIENT_SECRET=p455w0rd \
    bbr deployment \
    --target bosh.example.com \
    --username jumpbox \
    --deployment cf-acceptance-0 \
    --ca-cert bosh.ca.crt \
    backup-cleanup
    

Manage your backup artifact

To keep your backup artifact safe:

  1. Move the backup artifact off the jumpbox to your storage space. BBR stores each backup in a subdirectory named DEPLOYMENT-TIMESTAMP within the current working directory. The backup created by BBR consists of a directory with the backup artifacts and metadata files.

  2. Compress and encrypt the backup artifacts when storing them.

  3. Make redundant copies of your backup and store them in multiple locations. This minimizes the risk of losing your backups in the event of a disaster.

  4. Each time you redeploy Cloud Foundry, test your backup artifact by following the procedures in Restoring with BOSH Backup and Restore.

Note Backup artifacts might contain data covered by the European Union’s General Data Protection Regulation (GDPR), includingS contain personal data. For example, a backup of a BOSH deployment could contain user email addresses. As such, backup artifacts should be handled in accordance with organizational policies and applicable laws as they pertain to security, confidentiality, and privacy.

View the source for this page in GitHub